您好,欢迎来到三六零分类信息网!老站,搜索引擎当天收录,欢迎发信息
免费发信息
三六零分类信息网 > 防城港分类信息网,免费分类信息发布

PP免处理油墨,免处理PP油墨,PP油墨

2020/5/21 19:30:25发布207次查看
  • 品牌:其他
  • 保质期:72
  • 粘度:100
  • 适用对象:PP、PE、BOPP
  • 颜色:各种/调色
  • 印刷方式:移印
  • 单件净重:1KG
  • 着色力:100
  • 细度:0.05

欧莱斯mpe电镀油墨mpe电镀强化系列油墨油墨特性:主要用于电镀表面、强化表面、真空电镀表面.pu表面.uv表面等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。印刷:丝印移印均可。表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。稀释及清洗:sv3慢干开油水、uvk1(移印开油水)同时可使用718洗网水清洗。测试方法(完全干燥后):1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;3、耐磨:橡皮擦500g力水平来回擦500次。 使用方法:1、使用前应充分搅拌,用后随时封闭;2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗;4、不得与其它类型油墨混合使用。注意事项:1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;3、环境温度过高,将会影响油墨原有质量;4、根据气候变化,请远离火源,阴暗环境下存放。 oles mpe platingink
mpe plating strengthening series ink characteristics : mainlyusedin plating surface, enhanced surface, vacuum platingsurface.pusurface.uv surface and other materials, with a highcolor, highcolor, high covering power, high stability, high alcoholand rubcharacteristics. printing: screen printing can be. surfacedryingand drying time: surface dry time natural volatile 5-10minutes;work time within 24 hours. dilution and cleaning: sv3 slowdry openwater, uvk1 ( printing open water) can be simultaneouslyused 718washing network water cleaning. test method ( completelydry ): 1,3m gummed paper in the paintings of the surface of theink, 45degree angle quickly pulled off the oil; 2, 99% of thepurity ofindustrial alcohol, one kilogram of weight of cotton packin theink surface, with a horizontal force pulling back and forth200times without decolorization; 3: oak, wear resistance eraser500gforce level brush back and forth 500 times. usage: 1, useshould befully stirred, use at any time after the closure; 2, addwatermixing 10-15%, diluted to 3, screen printing viscosity; theplug isavailable when washing network water cleaning; 4, not withothertypes of ink mixing. note: 1, the plastic material similarinappearance, but may be of different materials, customers needtotry to determine its requirements, and then batch printing; 2,inthe printing process, such as drawing or spread out, maybeappropriate to add some slow dry plaster; 3, theambienttemperature is too high, will affect the quality of theoriginalink; 4, according to climate change, please stay away fromfire,dark environment storage.

上海欧莱斯印刷材料有限公司
黄先生
18201776975
嘉定区沪宜公路6106号
防城港分类信息网,免费分类信息发布

VIP推荐

免费发布信息,免费发布B2B信息网站平台 - 三六零分类信息网 沪ICP备09012988号-2
企业名录